Electronic Metal

We are a professional manufacturer of producing and supplying customized electronic stamping parts, which are applied in the fields of electronic connectors, relay, digital products, board level shields, beryllium copper contacts and metal components. With getting client’s drawing and/or samples, we are able to build the precision tooling to make sure its stability and use life getting improving largely during the stamping production.

Relay Parts

Relay is a kind of electric control unit, which is an electric appliance to make the controlled volume generate appointed step change in the electric output circuit when the change of input volume(energizing quantity) reach the specified requirement. Relay is the automatic switch component that has the isolating function. And it’s usually applied in the fields of remote control, remote measurement, communication, automatic control, mechatronics and power electronic equipment, which is one of the most important control units.

Precision Metal

Precision metal specially means metal processing type that requires high precision in the hardware industry. Usually, the “Precision” commonly means the tolerance is within 0.05mm. We were engaging in the production and service of precision metal stamping over 5 years, and the precision parts that we can control for the tolerance: blanking & piercing +/-0.01mm, forming +/-0.03mm and the flatness +/-0.05mm. And that support us to become the very outstanding manufacturer in the field.

Connector Parts

Electronic connector is also called circuit connector, which is to connect two conductors in one loop to make the electricity or signal flow from one conductor into another conductor. The connector stamping parts that we produce involve USB female pocket and male plug, spring contacts and terminals, etc. We have rich production experience, we are able to customize a variety of metal stamping parts for connectors as per customer’s demand and drawing.

Relay Plug Pins

Relay is a kind of automatic electric switch, and its contact unit includes the plug pins. The relay plug pins is for connecting external electric power and signal in the relay. Their internal ends divide into the ones of tin welding connection wire and spring plate contact switch. So their material must have good performances of electric conduction and easy tin plating.

Stamping Parts For Insert Molding

Many metal parts have to use the method of machining to process before, and the cost is high and the efficiency is low. Currently, more and more parts in the electronic products are not simple metal parts or plastic parts, but to use the method of inert molding to produce. In this way, the component strength can be guaranteed and also the processing method can be improved to make the production cost lower.

Metal Bar

This part is a metal bar, which is the metal decoration bar used on the protection case for mobile phone. According to customer’s drawing with combining the convenient need of follow-up electroplating, the die has been built with unit of air-actuated cut off. It’s a progressive die, and the strip will be automatic air-actuated cut off after 20 parts are done during production. And the strip with 20 parts will directly go for follow-up electroplating that is in the rack plating.

Metal Cap

The part is the metal decoration cap on the housing of beauty apparatus, which is used by inserting to fit into the plastic housing. So, it’s the visible part and its surface must be bright without any scratch and has good flatness. The die we design and build is progressive for production, and the metal cap is drawing formed in round shape.

Stainless Steel Plate For EDM Electrode Holder

This part is the 50*50mm locating plate of electrode holder, which is the steel plate for standard electrode holder used on the EDM machine. Its material is 0.6mm stainless steel 301 and the hardness is between HV380-420. This product has high demand on flatness and can’t have any burr, and it’s required tight tolerance too.

Metal Components

This part is the metal component, which assembles in the plastic cylinder. It is the contact part between the internal electronic components and external output power. This product use 0.5mm brass H62 as the material, and it will do the nickel plating after stamping production.

Curl Terminal

This curl terminal is also called ring terminal, and as a component for electric connection, its main function is to guide electricity. And it is classified as a kind of connector in industry. This curl terminal is applied to connect electric wires conveniently, which is actually a metal plate in a certain length sealed in the isolated plastic and there are holes on its two ends for wires to insert.

Wire Connection Terminal

Wire connection terminal is a component to perform the electrical connection, which is classified as connectors in industry. Metal terminals are used for the convenience on the connection of electric wire, so their material needs to use the one with good conductivity like copper alloy and so on.

Pad Metal

In the supply for pad computer, we mainly provide the metal parts of assembly brackets, connectors and terminals for customers. The brackets usually use stainless steel, and the connectors and terminals mainly use copper. Customers will provide part files or samples, and we provide the OEM services for them. We are able to design and build the tooling, and can make samples in free for clients.

Laptop Keyboard Metal Backplate

The metal backplates used on the laptop keyboard or wireless keyboard are mainly galvanized sheet, and the thickness is 0.3mm. This backplate has many small fasteners, which are the critical assembling structure. So that requires high tolerance. Parts must be out of oil and burr.

Metal Housing

We produce professionally all kinds of metal housing by stamping, such as the pictures shown we provide customized OEM service based on customer’s prints and samples. The produce material is stainless steel, and they are progressively produced and then passivated afterwards. We provide die design and building, stamping production and surface treatment in one stop service, and that saves lots of labor and time for customers.

Drawn Shell

We have rich experience in drawn forming and have done many cases of drawn shells for customers. As the pictures shown, the parts are OEM customized by us based on customer’s print and sample. We design and build the die which is the progressive design. The product material is 1.0mm thick galvanized steel, and the part needs to be drawn formed by several steps so that the production quality and efficiency of the part can improve a lot.

Drawn Aluminum Housing

As the pictures shown, the product is an adapter, which is a drawn aluminum housing, and the final user is the Japanese customer. This pat uses two kinds of compound aluminum material to reach customer’s requirement on product surface. And the client has high requirement on the flatness and perpendicularity of the part, and also the formed wall thickness can’t change too much.

Drawn Lock Cover

As the pictures shown, the product is the cover used in the inside of intelligent lock, which is made with drawn forming. The part material is 0.4mm thick brass H65, and it is OEM customized based on the client’s print. This part requires highly on the position and dimension tolerance of the assembling holes, so the position of the holes need to make the emboss before pierce.

SIM Card Tray

SIM Card Tray is the bracket for SIM card assembly, it is one of the mobile accessory. In the past, the SIM card try was processed integrally by CNC machining with high cost and poor efficiency. Our company research and develop the progressive die for volume production. Then the production capacity is increased so many and the cost is reduced so much. The SIM Card Tray plus over-molding process can get the final finished product

Backup Camera Mounting Bracket For Mobile Phone

Backup camera mounting bracket for mobile phone is an important accessory of the mobile phone, which plays a role in the installation of the camera and the exterior decoration of the mobile phone. At present, the rear camera bracket of mobile phones is generally produced by decorative steel sheet + injection molding. Our company mainly provides stamping dies and metal stamping production services for mobile phones and related industries.

Metal Stamping For 5G Facility

The 5th generation mobile communication technology (referred to as 5G) is a new generation of broadband mobile communication technologies with high speed, low delay and large connection characteristics, and is a network infrastructure to realize man-machine interconnection. At present, 5G technology is increasingly widely used in our lives, like 5G mobile phones, unmanned bus / subway, 5G supported remote surgical operations, etc have been used in our lives too.

Metal Plate For Mobile Phone

Mobile phones are an indispensable communication tool in our daily lives, and the speed of replacement of each year is also quite fast. Most of the structure of the mobile phone is a metal part. It has been used more and more widely in the mobile phone in recent years. In order to meet the changes in the market and the huge demand of delivery, our company almost uses the progressive dies to improve the production efficiency and quality control.

Mounting Bracket For Mobile Phone

As we all know, the assembly of mobile phones is quite complicated, with hundreds of parts involved. Among them, the assembly is inseparable from the mounting bracket, the PCB board assembly middle frame, the screen assembly bracket, the front and rear camera assembly bracket, other electronic component assembly hardware and so on. Most of the mounting brackets of the mobile phone are made of stainless steel. Some need to be insert molding later; some need to be riveted; some need to be tapped to achieve the effect of mobile phone assembly.

Electronic Metal

We are a professional manufacturer of producing and supplying customized electronic stamping parts, which are applied in the fields of electronic connectors, relay, digital products, board level shields, beryllium copper contacts and metal components.