Stamping die is a tool that uses the die to exert pressure on the material to produce various products, and its quality and performance directly affect the production efficiency and product quality. Therefore, it is very important to maintain and care for the stamping mould, which is discussed in detail below.

Keep the surface clean

Stamping moulds must be kept clean after use in order to facilitate subsequent maintenance and repair. Before use, special cleaners and brushes can be used to clean the surface of the mould to remove oil and impurities on the surface. During use, the moulds need to be cleaned regularly to prevent the accumulation of dirt and impurities on the surface of the moulds, which may affect the precision and service life of the moulds.

Regular lubrication

Lubrication is the key to maintain the normal operation of the stamping die. Before use, the sliding parts of the die need to be lubricated to reduce friction and wear. During use, the sliding parts of the die need to be lubricated regularly to ensure the normal operation of the die.

Regular Inspection

Regular inspection is an important measure to ensure the normal operation of the stamping die. Before use, it is necessary to carry out a comprehensive inspection of the mould to ensure that the parts of the mould are not damaged or loose. In the process of use, the die needs to be inspected regularly to ensure the accuracy and performance of the die.

Regular replacement

The parts of the stamping mould need to be replaced regularly to ensure the normal operation of the mould. Before use, the parts of the mould need to be inspected to ensure that the parts of the mould are not damaged or aged. During use, the parts of the mould need to be replaced regularly to ensure the precision and performance of the mould.

Regular maintenance

Maintenance of the stamping mould is an important measure to ensure the normal operation of the mould. Before use, comprehensive maintenance of the mould is needed to ensure the precision and performance of the mould. In the process of use, regular maintenance of the mould is needed to ensure the precision and performance of the mould.

In short, the maintenance and repair of the stamping mould is an important measure to ensure the normal operation of the mould. Cleaning and maintenance, lubrication, inspection, replacement and maintenance are required before, during and after disassembly to ensure the precision and performance of the moulds, prolong the service life of the moulds, and improve the production efficiency and product quality.